Yıl:2018   Cilt: 4   Sayı: 2   Alan: Mühendislik Temel Alanı

  1. Anasayfa
  2. Makale Listesi
  3. ID: 43

Onur YAVUZ ,Emre KASURKA,Halil Ömer KESKİNSOY,Mehmet AĞAOĞLU,Osman KIRNAK

Ambalajlar için Yüksek Taşıma Potansiyeline Sahip Esnek Geçmeli Kulp Tasarımı

Çalışma, plastik enjeksiyon kalıplama ile bu zamana kadar belirli gramaj standartlarında üretilen ve ambalaj sanayi ürünlerinden biri olan taşıma kulp teçhizatının, daha hafif ve dayanıklı bir yapıya sahip olmasına imkan veren bir tasarımın geliştirilmesi, düşük ağırlık ve yüksek mukavemet sağlanması ile ilgilidir. Çalışmada, bir kısmı piyasada halihazırda kullanılan birbirinden farklı 6 tasarım denenmiş, ANSYS programı ile sanal analizler gerçekleştirilmiş ve sonuçlar incelenmiştir. Analiz sonuçlarının yanında, ürün ve üretim parametreleri üzerinden bir matris oluşturularak en doğru tasarımın seçilmesine karar verilmiştir. İki boğumlu geçmeli sap tasarımının (Tasarım 6) diğer tasarımlara göre avantajlı olduğu görülmüş ve iki farklı malzeme ile (YYPE-Yüksek Yoğunluklu Polietilen ve %20 AYPE-Alçak Yoğunluklu Polietilen katkılı YYPE) prototip üretimleri gerçekleştirilmiştir. Yapılan hesaplamaların gerçek ortamdada doğrulanması için ürünlerin test edileceği bir test düzeneği kurulmuştur. Bu test düzeneğinde her iki malzemedende üretilen ürünlere çekme kopma testi uygulanmış ve %100 YYPE ile üretilen ürünlerin mukavemet değerlerinin daha yüksek olduğu görülmüştür. Çalışma sonucunda, yaklaşık 4,5 gr ağırlığa sahip ve kendi ağırlığının yaklaşık 3300 katı ağırlığına kadar yük (145 N) kaldırabilen bir taşıma sapı geliştirilmiş ve bu orijinal tasarımla birlikte faydalı model tescil başvurusu gerçekleştirilmiştir.

Anahtar Kelimeler: Ambalaj, Sap, Tutucu, Hafiflik, Tasarım, Çekme Kopma Testi


High Lifting Potential Flexible-Pass Handle Design for Packaging

The study is concerned about the development and the design of the carrying handle equipment for the packaging industry, it is about low weight and high resistance in the production with plastic injection molding process. The goal is to make this product better structured and lighter. 6 different designs were tested, some of them was already in the market. All virtual analysis was performed with ANSYS and the results examined. In addition to the results of the analysis, it was decided to choose the right design by creating a matrix based on product and production parameters. The design with two knuckles (Design 6) proved to be advantageous over other designs, and two different prototypes (HDPE and 20% LDPE doped HDPE) were made. A test setup for testing the products was setted up. The tensile breakage test was applied to the products made in both materials, and the strength values of the products made by % 100 HDPE were higher. As a result of this study, a carrying handle weighing about 4.5 grams was developed, which can carry a load of up to 3300 times its own weight (145 N) and a utility model registration was made with this original design.

Keywords: Packaging, Handle, Holder, Lightness, Design, Tensile Test


Atıf İçin

Yavuz, O., Kasurka, E., Keskinsoy, H. Ö., Ağaoğlu, M. & Kırnak, O. (2018). High Lifting Potential Flexible-Pass Handle Design for Packaging. Journal of Current Researches on Engineering, Science and Technology, 4 (2), 99-112.


185